HV200 by Banjo | Manifold Flange Connections | 2" MPT Inductor | Pressure at Pump: 225 PSI | Volume Draw: 49 GPM | Opening Size: 7/16" | Polypropylene Eaton Auto-Flo 23 Series Hose Stem Sockets/Plugs 97" 1AA12SBB12 - 1-1/16-12 -12

97" 1AA12SBB12 - 1-1/16-12 -12 3

Size Size Thread Type Figure Dimensions Buna-N FKM EPDM A B Hex 1 mm in mm in mm in 5602-2-4S FD56-1062-02-04 5644-2-4S Plug/Male 1/4" 1/8" 1/8-27 Female NPT 1 31

1091P5300 1091P5301 1091P5304 1/8" 0

Self-sealing valve design allows connection and disconnection at 500 psi

807" 14mm 2

HV200 by Banjo | Manifold Flange Connections | 2" MPT Inductor | Pressure at Pump: 225 PSI | Volume Draw: 49 GPM | Opening Size: 7/16" | Polypropylene Eaton Auto-Flo 23 Series Hose Stem Sockets/Plugs 97" 1AA12SBB12 - 1-1/16-12 -12Applications: Fluids Features: Threaded or manifold ends Glass reinforced polypropylene Note: Each venturi comes in two pieces Note: The inductor is designed for use with a volume pump. Typical volumes and pressures used to operate the venturi would be in the 80 to 240 US GPM range at pressures from 26 to 52 PSI Note: US GPM. Tests done with water at ambient temperature. Pump used for test was a 2" Banjo (5 vane impeller) driven by a 5. 5 hp Honda gas