OBDSTAR (M084) | Scania 4-pins OBD – 16-pins OBD2 Verloopkabel | Verbrandingsmotor Autool you'll need to start with

you'll need to start with the activation and software license (74502016)

Bij de ETM-interface voor V9 (70001007) is hij niet nodig

new vehicle coverage and features are immediately available for use

Het is een eenmalige aanschaf: De activatie ontsluit de ADAS-software op uw Jaltest-apparatuur en blijft daarna geldig

5 m SUBD-26) when used with Jaltest Link V9 Required to Use Jaltest Link with valid software license

OBDSTAR (M084) | Scania 4-pins OBD – 16-pins OBD2 Verloopkabel | Verbrandingsmotor Autool you'll need to start withThe OBDSTAR M084 is the adapter cable for the round 4 pin Scania diagnostic port. The cable connects that port to the 16 pin OBD2 (J1962) connector on your OBDSTAR device and plugs into the factory diagnostic port on the truck's side. Scania equipped these vehicles with a proprietary round 4 pin port instead of a standard OBD2 connection. This port carries the K line, the communication protocol used by older Scania diagnostic systems. The cable itself