Pay in 4 interest-free payments of $3.74 Learn more
Ships within 48 hours · Estimated delivery Sep 15 - Sep 20
This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Kawasaki ZRX400 for the years and models shown above
90mm from centre to centre with 2 HT leads and 2 spade connectors
This ignition coil has been designed to replace the part numbers 33410-48B00 or 33420-48B00 on a Suzuki GSX 1100
Honda CBR 600 F4 (1999-2006)
with 2 spade connector points and 2 HT leads
headstock bearings and seals yamaha it125 it 125 1980 1984 Honda ST70 This set of head stockBrand new set of headstock steering bearings and seals to fit: Yamaha IT 125 (1980 1984). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha IT125 for the years and models shown above. Top sized: 25mm x 43mm x 12mm. Bottom sized: 30mm x 48mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. The seal thickness is
